With active carriers of lustrous carbon
Technical parameters
| Adsorption MB | Moisture from (%) | Moisture to (%) | Binding power (kPa) | Wet tensile strength in water condensation zone (kPa) | Dry screen residue 0,315 (%) | Dry screen residue 0,063 (%) | Thermostability (%) | Carbonate content (%) | LC content (calculated) (%) | LC content (Bindernagel) (%) | Loss on ignition (%) | Bentonite content (%) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Keribent C 25 | min. 240 | 6 | 12 | min. 100 | 0.00 | max. 2 | max. 35 | - | - | 0.00 | min. 1.00 | min. 26 | 0.00 |
| Keribent C 30 | min. 240 | 6 | 12 | min. 100 | min. 2.20 | max. 2 | max. 35 | - | - | min. 3.00 | min. 1.50 | min. 27 | 77.10 |
| Keribent C 40 | min. 230 | 6 | 12 | min. 100 | min. 2.20 | max. 2 | max. 35 | - | - | min. 4.00 | min. 2.00 | min. 29 | 75.40 |
| Keribent CL | min. 240 | 6 | 12 | min. 100 | 0.00 | max. 2 | max. 35 | - | - | 0.00 | min. 1.00 | min. 23 | 0.00 |
| Keribent Plus 25 | min. 225 | 6 | 12 | min. 100 | min. 2.50 | max. 2 | max. 35 | - | - | 0.00 | min. 1.00 | min. 28 | 74.10 |
| Keribent Plus 30 | min. 225 | 6 | 12 | min. 100 | min. 2.50 | max. 1 | max. 35 | - | - | 0.00 | min. 1.50 | min. 28 | 73.80 |
| Keribent Plus 40 | min. 225 | 6 | 12 | min. 100 | min. 2.50 | max. 2 | max. 35 | - | - | 0.00 | min. 2.00 | min. 30 | 72.00 |
| Sabenil C 25 | min. 220 | 6 | 12 | min. 100 | min. 2.20 | max. 2 | max. 35 | - | - | 0.00 | min. 1.00 | min. 26 | 78.20 |
| Sabenil C 30 | min. 215 | 6 | 12 | min. 100 | min. 2.20 | max. 2 | max. 35 | - | - | 0.00 | min. 1.50 | min. 27 | 76.80 |
| Sabenil C 40 | min. 200 | 6 | 12 | min. 100 | min. 2.20 | max. 2 | max. 35 | - | - | 0.00 | min. 2.00 | min. 29 | 74.20 |
| Sabenil CF 25 | min. 225 | 0 | 12 | min. 100 | 0.00 | max. 2 | max. 35 | - | - | 0.00 | min. 1.00 | min. 26 | 0.00 |
| Sabenil CF 30 | min. 210 | 0 | 12 | min. 100 | 0.00 | max. 2 | max. 35 | - | - | 0.00 | min. 1.50 | min. 27 | 0.00 |
| Sabenil CF 40 | min. 200 | 0 | 12 | min. 100 | 0.00 | max. 2 | max. 35 | - | - | 0.00 | min. 2.00 | min. 29 | 0.00 |
SABENIL C 25, 30, 40, 50
It is a mixture of SABENIL 65 with high-quality bituminous coal and other admixtures. It is above all a binder for facing sands used in casting graphitizing alloys. It suppresses pin hole formation It is not explosive, and not susceptible to self-ignition. It ensures well-finished castings.
KERIBENT C 25, 30, 40, 50
It is a mixture of bentonite with the enhanced properties of KERIBENT R, high-quality bituminous coal flour and other admixtures. It is used for facing sands in casting graphitizing alloys. It ensures excellently finished castings. It is not explosive, and not susceptible to self-igniton.
KERIBENT CF 25, 30, 40, 50
It is a mixture of bentonite with the enhanced properties of KERIBENT R, high-quality bituminous coal flour and other admixtures. It is used for facing sands in casting graphitizing alloys. It ensures excellently finished castings. It increases mould edge strength and resistance to drying off. It reduces sand inclusion.
ČSN EN ISO 14001 and ČSN EN ISO 9001
Bentonit manufacturing is subject to Quality Management System as per ČSN EN ISO 9001 and to Environmental Management System as per ČSN EN ISO 14001.
Tested
By ČSN 72 1077 - PNK 72 1345 and by internal regulations in accordance with VDG - Merkblatt P 69/98.
Services
Services for our customers are free of charge. We analyse facing sands and offer consultations. We can recommend the most suitable bentonite product for your foundry.
Storage life
Unlimited in a dry place.
Packaging and shipping
- 48 kg bags
- on pallets in shrink foil
- in covered Czech Railway wagons
- in Czech Railway RAJ tankers
- in road tankers
- pneumatic transport can be used safely
Quality guarantee
The guaranteed parameters are stated on the catalogued material sheet of the product and form an integral part of the purchase.
Separation agent
For pattern plants we recommend the environment-friendly agent Gasep BCT, produced by GaTo, 284 49 Kutná Hora, Czech Republic.
This product is made of natural materials, so minor divergences from the properties given in the technical documents may occur.
Technical parameters
